Click image to view full size image
ATM-250P Fully automatic auxiliary material labeling machine
Customer production process requirements
1. PCB optical board labeling, backing, mylar, potted sheet and other auxiliary materials.
2.Accuracy ±0.1mm
3.PCB size MAX: 250*330mm
Equipment size (mm): ≈ L1000*W1100*H1700
Automatic auxiliary material labeling machine hard body description-Feeder roll material requirements
1. the maximum width of the standard Feeder backing paper is 75mm, more than the need for customization.
2. arrangement of auxiliary materials: matrix arrangement X spacing ≥ 1.5mm (the number of even) Y direction spacing ≥ 1.5mm.
3. Auxiliary material edge safety distance ≥ 2mm.
4. auxiliary material cutting to be completely, and can not damage the backing, auxiliary material without overflow glue.
5. release paper die-cutting strength should not be too large, if there are scars on the release paper, easy to tear when peeling.
6. the thickness of the release paper recommended ≤ 0.05mm and soft material is easier to peel.
7. If there is no sticky part of the label, the non-sticky part should be stripped first.
8. rectangular labels should be fed in the direction of the wide side and the long side should be peeled off.
9. The following is based on a previous customer to do the material for reference.
http://www.gdqintech.com/